ENERGY STAR qualified windows, doors, and skylights save you energy and money, increase the comfort of your home, and protect your valuable possessions from sun damage. They are also better for the environment because lowering your energy use means less air pollution from power plants.
Save money and energy. Replacing single-paned windows with ENERGY STAR qualified windows or choosing ENERGY STAR over the typical clear-glass double-paned alternative can save a significant amount of money on your energy bill.
Say goodbye to winter drafts and sweating in the summer sun. Thanks to a host of new technologies, ENERGY STAR qualified windows, doors, and skylights keep your home cooler in the summer and warmer in the winter, making you more comfortable year round.
Protect your home’s interior. Many ENERGY STAR qualified windows, doors, and skylights act like sunscreen for your house, protecting your photographs, artwork, furniture, carpets, and wood floors from sun damage.
Buy with confidence. Every ENERGY STAR qualified window, door, and skylight is independently certified to perform at levels that meet or exceed strict energy efficiency guidelines set by the U.S. Department of Energy.
Ask for ENERGY STAR. To purchase the most efficient window for your home, ask for products that are ENERGY STAR qualified in your Climate Zone. To learn more, see the window purchasing tips.
Seal and insulate with Home Sealing. Sealing your home’s envelope is one of the most cost-effective ways to lower your home’s energy bills and improve your comfort.
What’s in a pane – or two?
All energy efficient windows have at least two panes, but not all double-paned windows are energy efficient. Twenty years ago, double-paned meant energy efficient; today, advanced technologies have enabled the development of windows that are much more efficient than traditional clear-glass double-paned windows. For maximum energy savings, don’t count panes; count on ENERGY STAR.
By replacing the five most frequently used lights in your home with ENERGY STAR qualified lighting, you can save about $60 each year in energy costs. Lighting fixtures that have earned the ENERGY STAR combine high performance, attractive design, and highest levels of energy efficiency, so they save energy, save money on utility bills and help protect the environment.
Earning the ENERGY STAR
ENERGY STAR fixtures must last 10,000 – 20,000 hours. This means, with regular use (i.e., 3.5 hours per day), you won’t need to change the bulb for at least seven years.
ENERGY STAR qualified fixtures distribute the light more efficiently and evenly than standard fixtures.
ENERGY STAR fixtures can now be found at most home centers, lighting showrooms, and specialty stores. Look for qualified fixtures for the following applications: torchieres, under and over cabinets in the kitchen, ceiling-mounted, wall sconces, suspended fixtures and outdoor lighting, including motion sensor fixtures.
Halogen torchieres have been responsible for dozens of fires nationally, some with tragic consequences. During use, the temperature of a halogen torchiere bulb can reach 1000F, while an ENERGY STAR torchiere uses technology that operates at lower temperatures. What’s the Difference?
All ENERGY STAR qualified light fixtures carry a 2 year warranty – double the industry standard.
Remember, saving energy prevents pollution. ENERGY STAR qualified lighting uses about 66% less energy than standard lighting. When you save energy, you not only save money on utility bills, but you also protect our environment. For other tips, visit our interactive buyers guide or download our two-page Lighting Brochure.
Fixtures Guide
With the ENERGY STAR Fixtures Guide, you can:
view photos of decorative ENERGY STAR fixtures in actual room settings
discover the benefits of ENERGY STAR lighting
learn about lighting quality, lumen equivalence, color temperature, color rendering, and the lack of flicker/hum/ or buzz with ENERGY STAR lighting
locate stores that sell ENERGY STAR lighting
The ENERGY STAR Fixtures Guide was compiled with the assistance of ENERGY STAR partnering utility, regional,and state energy efficiency programs. Significant content of the showcase was licensed from Efficiency Vermont’s ENERGY STAR Lighting Guide. Efficiency Vermont developed its Lighting Guide with assistance from the Westinghouse Lighting Corporation and the New Jersey Clean Energy Programs. For information on printing rights for the Lighting Guide, please contact Efficiency Vermont at 1-888-921-5990. Additional content was provided by www.LightingPlans.com, a project of the Northwest Energy Efficiency Alliance.
Electric air-source heat pumps, often used in moderate climates, use the difference between outdoor air temperatures and indoor air temperatures to cool and heat your home.
Earning the ENERGY STAR means products meet strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy. ENERGY STAR qualified heat pumps have a higher seasonal efficiency rating (SEER) and heating seasonal performance factor (HSPF) than standard models, which makes them about 20% percent more efficient than standard new models and 20-50% more efficient then what you may have in your home. Remember, saving energy prevents pollution.
By choosing ENERGY STAR and taking steps to optimize the performance of your heating and cooling equipment, you are helping to prevent global warming and promoting cleaner air while enhancing the comfort of your home. You may also be interested to know: Though these products can be more expensive to purchase up front, the cost difference will be paid back over time through lower energy bills.
When buying new equipment, sizing and installation are as important as product quality. Make sure to find a good contractor.
You can get better heating and cooling performance at home with ENERGY STAR home sealing (insulation and air sealing) and duct sealing.
Consider regular maintenance to maintain your heating and cooling system performance.
Finding Qualified Equipment
The Consortium for Energy Efficiency (CEE) and the American Refrigeration Institute (ARI) have developed an online database which can be used to find qualifying ENERGY STAR equipment. All equipment listed in this online database meets the specification requirements for ENERGY STAR. This online database is solely maintained and operated by CEE and ARI. To help understand how to use this online database, we have created a quick guide (118KB) to help you with the various fields used in this online database. Search CEE-ARI Online Database.
Find a Contractor
The Air Conditioning Contractors of America (ACCA) online Contractor Locator includes a special designation to identify contractors who sell and are knowledgeable about ENERGY STAR qualified HVAC equipment. ACCA is a non-profit association whose goal is to help the best Heating, Ventilation, Air-conditioning and Refrigeration (HVACR) contractors serve their customers. Look for the “Ask About ENERGY STAR” logo in the contractor search results. Please note that these contractors are not certified, endorsed, or otherwise approved by the U.S. EPA. Click here for ACCA Contractor locator.
Air-Source Heat Pumps Information Resources
Residential vs. Non-Residential Air-Source Heat Pumps
Residential: models with heating and/or cooling output capacities less than 65,000 Btuh, and that use a single-phase electric supply. Minimum efficiency levels for this equipment are established by the National Appliance Energy Conservation Act (NAECA). The energy-efficiency metrics for residential models are:
Cooling mode: Seasonal Energy Efficiency Ratio (SEER)
Non-residential: models with heating and/or cooling output capacities equal to or greater than 65,000 Btuh and that use a a single-phase electric supply, and all models that require a three-phase electric supply. Minimum efficiency levels for this equipment are established by the Energy Policy Act of 1992 (EPAct). The energy efficiency metrics for non-residential models are:
Cooling mode: Energy Efficiency Ratio (EER)
Heating mode (heat pumps only): Coefficient of Performance (COP)
Information Source: List of ENERGY STAR Qualified Products
Information Source: California Energy Commission database
ENERGY STAR qualified refrigerated beverage vending machines can save building and business owners 1,300 kWh/year, or $90 annually on utility bills.
Earning the ENERGY STAR means products meet strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy.
Refrigerated beverage vending machines that have earned the ENERGY STAR are 35% more energy-efficient than standard new machine models.
ENERGY STAR qualified vending machines incorporate more efficient compressors, fan motors, and/or lighting systems to keep beverages cool and the machine visible while using less energy.
ENERGY STAR qualified machines also come with a low power mode option that allows the machine to be placed in low-energy lighting and refrigeration states during times of inactivity.
Where can I get one?
Ask your local beverage distributor or supplier about available machine models that meet ENERGY STAR.
Remember, saving energy prevents pollution. By choosing a vending machine that meets ENERGY STAR, you are helping prevent global warming and promote cleaner air without sacrificing the product quality and performance you expect. To maximize your savings, ask your distributor or supplier to program the low power mode so that you can save energy when the machine isn’t being used.
Refrigerated Beverage Vending Machine Qualified Model List
About one-sixth of all the electricity generated in the US is used to air condition buildings.
Earning the ENERGY STAR means products meet strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy. ENERGY STAR qualified central air conditioners have a higher seasonal efficiency rating (SEER) than standard models, which makes them about 25% more efficient. Remember, saving energy prevents pollution. By choosing ENERGY STAR and taking steps to optimize the performance of your cooling equipment, you are helping to prevent global warming and promoting cleaner air while enhancing the comfort of your home. You may also be interested to know: Though these products can be more expensive to purchase up front, the cost difference will be paid back over time through lower energy bills.
When buying new equipment, it is important to get a quality installation. Make sure you get a contractor who can do the job right.
You can get better performance out of your cooling equipment by sealing your home and making sure your ducts don’t leak.
EPA offers additional suggestions for improving the performance of your cooling system as well as general home improvement advice.
Finding Qualified Equipment
The Consortium for Energy Efficiency (CEE) and the American Refrigeration Institute (ARI) have developed an online database which can be used to find qualifying ENERGY STAR equipment. All equipment listed in this online database meets the specification requirements for ENERGY STAR. This online database is solely maintained and operated by CEE and ARI. To help understand how to use this online database, we have created a quick guide to help you with the various fields used in this online database. Search CEE-ARI Online Database.
Find a Contractor
The Air Conditioning Contractors of America (ACCA) online Contractor Locator includes a special designation to identify contractors who sell and are knowledgeable about ENERGY STAR qualified HVAC equipment. ACCA is a non-profit association whose goal is to help the best Heating, Ventilation, Air-conditioning and Refrigeration (HVACR) contractors serve their customers. Look for the “Ask About ENERGY STAR” logo in the contractor search results. Please note that these contractors are not certified, endorsed, or otherwise approved by the U.S. EPA. Click here for ACCA Contractor locator.
Residential vs. Non-Residential Central Air Conditioners
Residential: models with cooling output capacities less than 65,000 Btuh, and that use a single-phase electric supply. Minimum efficiency levels for this equipment are established by the National Appliance Energy Conservation Act (NAECA). The energy-efficiency metric for residential models is: Seasonal Energy Efficiency Ratio (SEER).
Non-residential: models with cooling output capacities equal to or greater than 65,000 Btuh that use a single-phase electric supply, and all models that require a three-phase electric supply. Minimum efficiency levels for this equipment are established by the Energy Policy Act of 1992 (EPAct). The energy-efficiency metric for non-residential models is: Energy Efficiency Ratio (EER).
Information Source: California Energy Commission database
How to Access: On-line: www.energy.ca.gov/efficiency/appliances/conditioners/CENA.HTM Downloadable by anonymous ftp at: ftp://energy.ca.gov/pub/efftech/ or via an on-line bulletin board service by dialing (916) 654-4069.
A “Read Me” file describes all of the information available and gives instructions for downloading and use of the database files, including file decompression procedures. The fields in each database are described in a separate text file. Three-letter codes for Manufacturer names and Brand names, for all product types together, are listed in alphabetical order in two separate text files containing approximately 1,500 names and codes.
To make a special request for a printed list, contact: Appliance Certification Program California Energy Commission (916) 654-5106 (916) 654-4304 (fax) Email: [email protected]
Scope: On-line listing includes over 1,100 residential-type models that have a Seasonal Energy Efficiency Ratio (SEER) of 12.0 or higher (approximately 40 percent of the models of this type in the database).
Single Package and Split System models
Cooling capacities from 8,700 – 60,500 Btuh 230 and 208 volt, single-phase systems
Models are listed in order of descending SEER
SEER and EER values listed for each split system model represent the condenser/coil combination identified by the manufacturer as most likely to represent the highest national sales volume
Downloadable file includes both residential and non-residential type models and contains data on models that meet minimum federal and California standards (available in DBF, comma-delimited, or ASCII format).
Air source central air conditioners, air-source heat pumps, and geothermal heat pumps are together in one file that totals over 10,000 models
Approximately two-thirds are residential type models
Single-phase and three-phase systems
Cooling capacities: 8,500 – 134,000 Btuh
Original Data Source: Submitted to the Commission by the Air Conditioning and Refrigeration Institute (ARI) on behalf of represented manufacturers or provided directly to the Commission by manufacturers.
Update Frequency: Monthly
Information Source: Pacific Gas & Electric (PG&E) Express Efficiency Program On-line database
How to Access: On-line: www.pge.com/customer_services/business/energy/express under “Who Makes Energy Efficient Products?”
For printed copies, customers in PG&E’s service territory can contact their account representative, who have access to an Excel version of the databases. Not available outside PG&E’s service territory.
Scope: Database contains over 4,200 models from among 56 brands.
Cooling capacities from 8,700 – 134,800 Btuh.
Includes both residential and non-residential-type models.
Order of search output is not user-specifiable; output list is ordered alphabetically by manufacturer, then in alphabetical and numeric order by model number.
Original Date Source: California Energy Commission database, described above.
Update Frequency: Uncertain
Information Source: American Council for an Energy-Efficient Economy’s (ACEEE) Listings of the Most Efficient Appliances
Exit Signs If all U.S. companies switched to ENERGY STAR qualified exit signs, they would save $75 million.
Earning the ENERGY STAR
Exit signs that have earned the ENERGY STAR operate on five watts or less per sign, compared to standard signs, which use as much as 40 watts per sign.
When installed throughout a building, qualified exit signs can save hundreds or even thousands of dollars in energy and maintenance costs. One sign alone can save about $10 annually on electricity costs and can last up to 10 years without a lamp replacement, compared to less than one year for an incandescent. Signs that have earned the ENERGY STAR are tested for visibility factors, and come with a five-year manufacturer warranty.
Remember, saving energy prevents pollution.
There are more than 100 million exit signs in use throughout the U.S. Typically lit by incandescent bulbs, these signs consume 30-35 billion kilowatt hours (kWh) hours of energy each year.million in electricity costs.
Exit Signs Information Resources
Information Source: ENERGY STAR qualified product listing
Information Source: National Lighting Product Information Program (NLPIP) Specifier Report: Exit Signs (January 1994, revised November 1994) and Supplements (March 1995 and March 1998)
How to Access: Print only; available from the Lighting Research Center at Rensselaer Polytechnic Institute, Troy, NY.
Abstracts of Specifier Reports and more information about NLPIP are available on-line at: http://lrc102.lightingresearch.org/nlpip/
Individual (1-9) copies of Specifier Reports (including any Supplements) can be ordered for $30 each; 10-99 copies are $15 each. Supplements can also be purchased individually for $4 each.
NLPIP also offers two subscription options (both include a subscription to the newsletter Lighting Answers):
$380: Includes a complete set of all published Specifier Reports and Supplements, plus a two-year subscription to all future NLPIP publications
$200: Two-year subscription to all future NLPIP publications
Contact: Lighting Research Center (518) 276-8716 (518) 276-2999 (fax) Email: [email protected]
A complete set of published Specifier Reports and Supplements, a subscription to Lighting Answers, and a subscription to the quarterly newsletter Lighting Futures are available on the Web at http://www.lrc.rpi.edu/NLPIP/index.html.
You may receive these materials for free if you participate in certain EPA or DOE programs. Check the Web to learn how to obtain the reports.
Scope: Covers both energy-efficient exit signs and energy-efficient exit sign retrofit kits. Tables of model specific data in original Specifier Report and two Supplements cover seven types of products, totalling over 100 products from among more than 30 manufacturers:
LED (including regular LED light source, Edge-lit, and Direct-View LED)
Compact fluorescent
Incandescent
Electroluminescent
Radioluminescent
Includes manufacturer-supplied product information and results of NLPIP’s evaluations of the products’ photometric properties, power characteristics, readability, and visibility in smoke. Listing order is alphabetical by manufacturer.
Original Data Source: Product data supplied by manufacturers; performance data obtained through testing by NLPIP.
Update Frequency: Supplements published in March 1995 and March 1998. These are published irregularly according to need and subject to the availability of funding.
Geothermal heat pumps are similar to ordinary heat pumps, but use the ground instead of outside air to provide heating, air conditioning and, in most cases, hot water. Because they use the earth’s natural heat, they are among the most efficient and comfortable heating and cooling technologies currently available.
Earning the ENERGY STAR means products meet strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy.
ENERGY STAR qualified geothermal heat pumps use about 40-60 percent less energy than a standard heat pump.
They are quieter than conventional systems.
Remember, saving energy prevents pollution. By choosing ENERGY STAR and taking steps to optimize the performance of your heating and cooling equipment, you are helping to prevent global warming and promoting cleaner air while enhancing the comfort of your home.
You may also be interested to know:
Though these products can be more expensive to purchase up front, the cost difference will be paid back over time through lower energy bills.
When buying new equipment, sizing and installation are as important as product quality. Make sure to find a good contractor.
You can get better heating and cooling performance at home with ENERGY STAR home sealing (insulation and air sealing) and duct sealing.
Consider regular maintenance to maintain your heating and cooling system performance.
Find a Contractor: The Air Conditioning Contractors of America (ACCA) online Contractor Locator includes a special designation to identify contractors who sell and are knowledgeable about ENERGY STAR qualified HVAC equipment. ACCA is a non-profit association whose goal is to help the best Heating, Ventilation, Air-conditioning and Refrigeration (HVACR) contractors serve their customers. Look for the “Ask About ENERGY STAR” logo in the contractor search results. Please note that these contractors are not certified, endorsed, or otherwise approved by the U.S. EPA. Click here for ACCA Contractor locator.
Residential vs. Non-Residential Geothermal Heat Pumps There is no official categorical distinction or division among geothermal heat pumps into non-residential vs. residential. The energy-efficiency metrics for all geothermal heat pumps are Energy Efficiency Ratio (EER) and Coefficient of Performance (COP).
Information Source: ENERGY STAR qualified product listing
Information Source: California Energy Commission database
How to Access: Downloadable via an on-line bulletin board service by dialing (916) 654-4069. A “Read Me” file describes all of the information available and gives instructions for downloading and use of the database files, including file decompression procedures. The fields in each database are described in a separate text file. Three-letter codes for Manufacturer names and Brand names, for all product types together, are listed in alphabetical order in two separate text files containing approximately 1,500 names and codes.
To make a special request for a printed list, contact: Appliance Certification Program California Energy Commission (916) 654-5106 (916) 654-4304 (fax)
Scope: On-line list and downloadable file contain over 500 models offered for sale in California. Approximately half are residential type models Single package and split systems Water-source, groundwater-source, and ground-source closed-loop Cooling capacities from 6,800 – 152,000 Btuh Heating capacities from 8,600 – 189,000 Btuh
Original Data Source: Submitted to the Commission by the Air Conditioning and Refrigeration Institute (ARI) on behalf of represented manufacturers or provided directly to the Commission by manufacturers.
Update Frequency: Monthly
Information Source: American Council for an Energy-Efficient Economy’s (ACEEE) Listings of the Most Efficient Appliances.
How to Access: On-line: http://hes.lbl.gov/HES/new.html Listings are also printed in ACEEE’s Consumer Guide to Home Energy Savings, 6th ed, 1998, available in bookstores or directly from ACEEE; orders may be placed by phone, fax, or email.
Contact: Publications Manager American Council for an Energy-Efficient Economy (202) 429-0063 (202) 429-0193 (fax) Email: [email protected]
Cost: 1-25 copies: $8.95 each 26-99 copies: $6.36 each 100-499 copies: $4.77 each 500-999 copies: $3.98 each
Scope: Listing includes 100 models from among 10 brands. Ground-source and groundwater-source type. Cooling capacities from 2.5 to 5 tons. Heating capacities from 20,000 – 53,000 Btuh. Models are grouped by size (cooling/heating capacity), and listed in order of descending COP.
Original Data Source: Derived from Directory of Applied Air Conditioning Products, Air Conditioning and Refrigeration Institute (ARI), Arlington, VA, December 1997 – May 1998 edition.
Update Frequency: Annually
Information Source: EEPC/NYSERDA Energy Performance Listing, April 1997 (included in the “Commercial Heat Pumps” EPL, in Tables 7-20 and 28-39)
How to Access: Print only; available in limited numbers from existing stock.
Contact: Consortium for Energy Efficiency (617) 589-3949 (617) 589-3948 (fax) Email: [email protected]
Scope: Listing includes over 950 models from 17 manufacturers with EERs at or above the 75th percentile as established by analyses performed under the Federal Energy Management Program (FEMP). Cooling capacities from 9,900 – 65,000 Btuh. Heating capacities from 7,400 – 65,000 Btuh. Single package and split systems. Models are grouped by cooling source, system type, and size (cooling capacity) and listed in order of descending EER.
Original Data Source: Derived from Directory of Applied Air Conditioning Products, Air Conditioning and Refrigeration Institute (ARI), Arlington, VA, June November 1996, and Directory of Certified Unitary Air Conditioners, Unitary Air-Source Heat Pumps, and Sound-Rated Outdoor Unitary Equipment, February – July 1996.
By replacing the five most frequently used lights in your home with ENERGY STAR qualified lighting, you can save about $60 each year in energy costs. Lighting fixtures that have earned the ENERGY STAR combine high performance, attractive design, and highest levels of energy efficiency, so they save energy, save money on utility bills and help protect the environment.
Earning the ENERGY STAR ENERGY STAR fixtures must last 10,000 – 20,000 hours. This means, with regular use (i.e., 3.5 hours per day), you won’t need to change the bulb for at least seven years. ENERGY STAR qualified fixtures distribute the light more efficiently and evenly than standard fixtures. ENERGY STAR fixtures can now be found at most home centers, lighting showrooms, and specialty stores. Look for qualified fixtures for the following applications: torchieres, under and over cabinets in the kitchen, ceiling-mounted, wall sconces, suspended fixtures and outdoor lighting, including motion sensor fixtures.
Halogen torchieres have been responsible for dozens of fires nationally, some with tragic consequences. During use, the temperature of a halogen torchiere bulb can reach 1000F, while an ENERGY STAR torchiere uses technology that operates at lower temperatures. What’s the Difference?
All ENERGY STAR qualified light fixtures carry a 2 year warranty – double the industry standard. Remember, saving energy prevents pollution. ENERGY STAR qualified lighting uses about 66% less energy than standard lighting. When you save energy, you not only save money on utility bills, but you also protect our environment. For other tips, visit our interactive buyers guide or download our two-page Lighting Brochure.
ENERGY STAR for your Home and OfficeENERGY STAR for your Home and OfficeList of ENERGY STAR Qualified Equipment and Summary Specifications – March 2004
Equipment Specifications for ENERGY STAR Label Appliances
Clothes Washers Minimum Modified Energy Factor (MEF) of 1.42.
Dishwashers At least 25% more efficient than minimum federal government standards.
Full Size Refrigerators, 7.75 cubic feet or greater At least 15% more energy efficient than the minimum federal government standard (NAECA).
Full Size Freezers, 7.75 cubic feet or greater At least 10% more energy efficient than the minimum federal government standard (NAECA).
Compact Refrigerators and Freezers Less than 7.75 cubic feet and 36 inches or less in height At least 20% more energy efficient than the minimum federal government standard (NAECA).
Room Air Conditioners At least 10% more energy efficient than the minimum federal government standards.
Commercial Foodservice Products
Commercial Solid Door Refrigerators and Freezers Energy efficiency is measured in kWh/day. Specifications based on unit internal volume Refrigerators < 0.10V + 2.04 kW-hours/day.
Commercial Hot Food Holding Cabinets Energy efficiency is measured in watts/ft3. Maximum Idle Energy Rate is 40 watts/ft3.
Commercial Fryers Open deep-fat gas fryers must have a heavy load (French fry) cooking energy efficiency of > 50% and an Idle Energy Rate of < 9,000 Btu/hr. Open deep-fat electric fryers must have a heavy load (French fry) cooking energy efficiency of > 80% and an Idle Energy Rate of < 1,000 watts.
Commercial Steam Cookers Only 3-, 4-, 5-, and 6-pan units currently qualify to earn the ENERGY STAR. Electric steam cookers must have a cooking energy efficiency of at least 50%, and the maximum idle rate (measured in kW) varies depending on the number of pans. Gas steam cookers must have a cooking energy efficiency of at least 38%, and the maximum idle rate (measured in Btu/hr) varies depending on the number of pans.
Home Electronics
Answering Machines and Cordless Telephones Consume 3.3 watts or less when inactive. Models with spread spectrum technology may qualify at 3.6 watts or less.
Combination Cordless Telephones/Answering Machines Consume 4 watts or less when inactive. Models with spread spectrum technology may qualify at 5.1 watts or less. Additional Handsets Only Consume 1.5 watts or less when inactive.
DVD Products Consume three watts or less when switched off.
Home Audio Products Consume two watts or less when switched off. Set-top Boxes More energy-efficient standby/low-power mode than conventional models. Energy-efficiency specifications vary based on the type of device, ranging from 3-20 watts when switched off.
Analog TV Monitors Consume one watt or less when switched off.
Televisions, Digital TV Monitors, and Component TV Units Consume three watts or less when switched off.
DCR TVs with POD Slots Consume three watts or less when no POD is installed. TV/VCR Combination Units Consume six watts or less when switched off. VCRs Consume four watts or less when switched off.
TV/DVD Combination Units, VCR/DVD Combination Units, and TV/VCR/DVD Combination Units Consume four watts or less when switched off.
Home Envelope Products
Roofing Low Slope roofs must have an initial solar reflectance of > 0.65. After 3 years, the solar reflectance must be > 0.50. Steep Slope roofs must have an initial solar reflectance of > 0.25. After 3 years, the solar reflectance must be > 0.15.
Windows, Doors and Skylights for the Northern Climate Zone Windows and doors must have a U-factor* of 0.35 or below; there is no SHGC* requirement for this climate zone.
Skylights must have a U-factor* of 0.60 or below; there is no SHGC* requirement for this climate zone.
Windows, Doors and Skylights for the North/Central Climate Zone Windows and doors must have a U-factor* of 0.40 or below and a SHGC* of 0.55 or below. Skylights must have a U-factor* of 0.60 or below and a SHGC* of 0.40 or below.
Windows, Doors and Skylights for the South/Central Climate Zone Windows and doors must have a U-factor* of 0.40 or below and a SHGC* of 0.40 or below. Skylights must have a U-factor* of 0.60 or below and a SHGC* of 0.40 or below.
Windows, Doors and Skylights for the Southern Climate Zone Windows and doors must have a U-factor* of 0.65 or below and a SHGC* of 0.40 or below. Skylights must have a U-factor* of 0.75 or below and a SHGC* of 0.40 or below.
Lighting
Compact Fluorescent Lamps (CFLs) Product testing criteria for medium screw-based CFLs include: efficacy, lumen output, lifetime (minimum 6,000 hours), color rendering index, color temperature, power factor and start time. Must also comply with product packaging requirements set by the FTC and ENERGY STAR. Product includes a two-year warranty for residential applications. ENERGY STAR CFL criteria references standards set by: ANSI, CIE, IESNA and UL.
Exit Signs Operates on 5 watts or less per face. Residential Light Fixtures Energy-efficiency specifications based on specific performance characteristics relating to the lamp, ballast, and fixtures as a whole. The fixture, lamps, and ballast must be tested in accordance with the appropriate IESNA, ANSI, and UL reference standards, and must meet OSHA/NRTL safety and reliability guidelines. Includes a written 2-year manufacturer warranty covering repair and replacement of defective parts of the fixture housing or electronics (excluding the lamp).
Air-Source Heat Pumps > 8.0 HSPF/ > 13 SEER/ > 11 EER* for split systems > 7.6 HSPF/ > 12 SEER/ > 10.5 EER* for single package equipment including gas/electric package units Boilers Rating of 85% AFUE* or greater (About 6% more efficient than the minimum federal standards.)
Central Air Conditioners > 13 SEER/ > 11 EER* for split systems > 12 SEER/ > 10.5 EER* for single package equipment including gas/electric package units Furnaces Rating of 90% AFUE* or greater (About 15% more efficient than the minimum federal efficiency standards.) Geothermal Heat Pumps Open Loop: >3.6 COP (H); >16.2 EER (C)* Closed Loop: >3.3 COP (H); >14.1 EER (C)* Direct Expansion (DX): >3.5 COP (H); >15 EER (C)* Programmable Thermostats Capability of maintaining two separate programs (to address the different comfort needs of weekdays and weekends) and up to four temperature settings for each program.
Residential Ceiling Fans Specification defines residential ceiling fan airflow efficiency on a performance basis: CFM of airflow per watt of power consumed by the motor and controls. Efficiency is measured on each of 3 speeds. At low speed, fans must have a minimum airflow of 1,250 CFM and an efficiency of 155 CFM/Watt At medium speed, fans must have a minimum airflow of 2,500 CFM and an efficiency of 110 CFM/Watt At high speed, fans must have a minimum airflow of 5,000 CFM and an efficiency of 75 CFM/Watt Integral or attachable lighting, including separately sold ceiling fan light kits, must meet certain requirements of the RLF specification.
Ventilating Fans Range hoods (up to 500 cfm): maximum allowable sound level of 2.0 sones; minimum efficacy level of 2.8 cfm/Watt Bathroom and utility room fans (10 to 80 cfm): maximum allowable sound level of 2.0 sones; minimum efficacy level of 1.4 cfm/Watt; minimum rated airflow at 0.25 static w.g. 60% of 0.1 static w.g. airflow Bathroom and utility room fans (90 to 130 cfm): maximum allowable sound level of 2.0 sones; minimum efficacy level of 2.8 cfm/Watt; minimum rated airflow at 0.25 w.g. 70% of 0.1 static w.g. airflow Bathroom and utility room fans (140 to 500 cfm [max]): maximum allowable sound level of 3.0 sones; minimum efficacy level of 2.8 cfm/Watt; minimum rated airflow at 0.25 w.g. 70% of 0.1 static w.g. airflow In-line fans (single-port & multi-port): no sound or airflow requirement; minimum efficacy level of 2.8 cfm/Watt Light sources must use pin-based fluorescent technology and meet specific performance criteria based on system efficacy per lamp ballast combination, lamp start time, lamp life, color rendering index, correlated color temperature, noise, maximum total lamp wattage (excluding night lights), and maximum night light wattage*. Warranty provided must be a minimum of 1 year
*Note: Range hoods are exempt from the light source requirement until December 31, 2004.
New Homes 30% more energy efficient than the 1993 Model Energy Code (MEC).
Office Equipment
Computers Automatically enter a low-power “sleep” mode after a period of inactivity. Energy-efficiency specifications based on power supply. Include mechanisms through which the low-power modes of qualified monitors can be activated. Copiers Automatically enter “low-power” and/or “off” modes after a period of inactivity. Energy-efficiency specifications based on copier speed. Separate specifications available for large/wide-format models. Double-sided copying on standard-sized machines that copy at 20 pages or faster per minute is a recommended default option. Monitors Automatically enter two successive low-power modes of less than or equal to 15 watts and 8 watts after a period of inactivity.
Multifunction Devices (MFD) and Upgradeable Digital Copiers (UDC) Automatically enter “low-power” and/or “sleep” modes after a period of inactivity. Energy-efficiency specifications based on device speed. Separate specifications available for large/wide-format models. Double-sided copying on standard-sized MFDs that copy at 20 pages or faster per minute is a recommended default option. Printers, Faxes, Printer/Fax Combination Units, and Mailing Machines Automatically enter a low-power “sleep” mode after a period of inactivity. Separate specifications available for stand-alone printer models depending on paper handling size and color capabilities. Scanners Automatically enter a low-power “sleep” mode of less than or equal to 12 watts within 15 minutes of inactivity.
Other Products
Dehumidifiers Energy efficiency is measured in liters of water removed per kilowatt-hour of energy consumed. Ranges from > 1.20 to >1.50 L/kWh for standard capacity units. > 2.25 L/kWh for high capacity units.
Light Commercial HVAC Covers central air conditioners and heat pumps used in small office buildings, clinics and medical care facilities, hotels, dorms, military barracks, retail strip malls, and other locations (i.e., units rated at 65,000 Btu/h or up to 250,000 Btu/h as well as three-phase equipment rated below 65,000 Btu/h). Energy-efficiency specifications based on equipment type and size category.
Traffic Signals Specification based on a low energy requirement and conformance to the minimum performance requirements of the appropriate Institute for Transportation Engineers (ITE) specification. Transformers Low-Voltage Dry-Type Transformer Manufacturing Partners: Energy efficiency specifications based upon kVA, differing for single versus three-phased equipment.
Water Coolers Cold Only and Cook and Cold Bottled Units: < 0.16 kW-hours/day.
Hot and Cold Bottled Units: < 1.20 kW-hours/day. Back to Top *AFUE, HSPF, and COP (H) are measures of heating efficiency. SEER and EER are measures of cooling efficiency. SHGC is a measure of solar heat gain. U-factor is a measure of heat loss. kVA is a measure of electrical current. CFM is a measure of air movement.
If half of all US households replaced their regular TV with an ENERGY STAR model, the change would be like shutting down a power plant.
Earning the ENERGY STAR means a product meets strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy. ENERGY STAR qualified TVs, VCRs and combination units use about 25% less energy than standard units.
Remember, saving energy prevents pollution. By choosing ENERGY STAR, you are helping prevent global warming and promote cleaner air without sacrificing the product quality and performance you expect.
Americans spend about $40 billion annually to air condition buildings – one-sixth of all electricity generated in this country.
Why choose ENERGY STAR reflective roofing for your building?
ENERGY STAR qualified roof products reflect more of the sun’s rays. This can lower roof surface temperature by up to 100F, decreasing the amount of heat transferred into a building.
ENERGY STAR qualified roof products can help reduce the amount of air conditioning needed in buildings, and can reduce peak cooling demand by 10-15%.
During building design and when your existing roof needs replacement are both excellent times to consider reflective roofing. See how much reflective roofing can reduce your building’s energy costs.
How does roof insulation relate to ENERGY STAR labeled roof products?
The ENERGY STAR energy-efficiency criteria do not include a specification for roof insulation. However, in addition to reflectivity, roof insulation (measured by the R-value) plays an important role in building energy consumption for heating and cooling. The colder the climate, the greater the need for a higher R-value to ensure that less heat is lost from the building envelope. To determine the minimum R-value for a given location, refer to the International Energy Conservation Code.
Hot Food Holding Cabinets that have earned the ENERGY STAR are 60% more energy-efficient than standard models.
Earning the ENERGY STAR
Hot food holding cabinet models that earn the ENERGY STAR must meet a maximum idle energy rate of 40 watts/ft3. This means that ENERGY STAR qualified hot food holding cabinets are more efficient at maintaining food temperature while using less energy. Models that meet this requirement incorporate better insulation, reducing heat loss, and may also offer additional energy saving devices such as magnetic door gaskets, auto-door closures, or dutch doors. The insulation of the cabinet also offers better temperature uniformity within the cabinet from top to bottom.
Where can I get one?
Contact the manufacturers directly or speak with your food equipment supplier.
What can ENERGY STAR qualified hot food holding cabinets save me?
Each ENERGY STAR qualified hot food holding cabinet can save businesses 4,100 kWh annually, or an average of $280/year on utility bills.
Did you know that the average home spends about $1400 on energy costs every year? Change to appliances that have earned the ENERGY STAR, and you can save $80 a year in energy costs, while saving the environment.
Save Energy, Save Money
When buying an appliance, remember that it has two price tags: what you pay to take it home and what you pay for the energy and water it uses. ENERGY STAR qualified appliances incorporate advanced technologies that use 10-50% less energy and water than standard models. The money you save on your utility bills can more than make up for the cost of a more expensive but more efficient ENERGY STAR model.
Help Protect the Environment
Simple actions can make a big difference. If just one in 10 homes used ENERGY STAR qualified appliances, the change would be like planting 1.7 million new acres of trees.
For top performance, premium features, and energy savings, look for energy-efficient clothes washers, refrigerators, dishwashers, room air conditioners and dehumidifiers that have earned the ENERGY STAR. This mark may appear on the appliance, the packaging or the EnergyGuide label.
Furnaces are the most common residential heating system in the U.S.
Earning the ENERGY STAR means products meet strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy.
ENERGY STAR qualified furnaces have an annual fuel utilization efficiency (AFUE) rating of 90% or greater, making them about 15% more efficient than standard models.
Remember, saving energy prevents pollution. By choosing ENERGY STAR and taking steps to optimize the performance of your heating equipment, you are helping to prevent global warming and promoting cleaner air while enhancing the comfort of your home.
You may also be interested to know:
Though these products can be more expensive to purchase up front, the cost difference will be paid back over time through lower energy bills.
When buying new equipment, sizing and installation are as important as product quality. Make sure to find a good contractor.
You can get better heating and cooling performance at home with ENERGY STAR home sealing (insulation and air sealing) and duct sealing.
Consider regular maintenance to maintain your heating and cooling system performance.
A room air cleaner is a portable, electric, cord-connected appliance that removes fine particle matter from room air.
Did you know that a typical room air cleaner, operating continuously, uses approximately 600 kWh per year in electricity – this is equal to the power used by your refrigerator!
ENERGY STAR qualified room air cleaners are 35% more energy-efficient than standard models saving consumers 215 kWh/year, or $16 annually on utility bills. These savings could add up to as much as $150 over the life of the air cleaner!
Earning the ENERGY STAR means products meet strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy.
ENERGY STAR qualified room air cleaners use less energy to remove particles, such as dust and pollen from indoor air.
Qualified models that offer secondary features such as clocks and remote controls consume less than 2 watts while in standby mode.
ENERGY STAR specification for room air cleaners measures energy efficiency by using a CADR/Watt ratio. Clean Air Delivery Rate (CADR) is a measure of the amount of contaminant-free air delivered by the room air cleaner. However, please note, the US EPA does not endorse any manufacturer claims of healthier indoor air from the use of this product.
Remember, saving energy prevents pollution. By choosing a room air cleaner that meets ENERGY STAR, you are helping prevent global warming without sacrificing the product quality and performance you expect.
Room Air Cleaners Key Product Criteria
EquipmentSpecification Room Air Cleaners Must produce a minimum 50 CADR* for Dust to be considered under this specification.
Standby Power Requirement: = 2.0 Watts Qualifying models that perform secondary consumer functions (e.g. clock, remote control) must meet the standby power requirement.
UL Safety Requirement: Models that emit ozone as a byproduct of air cleaning must meet UL Standard 867 (ozone production must not exceed 50ppb)
*Clean Air Delivery Rate (CADR) must be measured according to the latest ANSI/AHAM AC-1 (AC-1) Standard (Go to www.aham.org for information regarding the latest edition of the AC-1 Standard).
Product Packaging Requirements
The ENERGY STAR disclaimer label, which includes the following statement, must be placed on the product packaging of ENERGY STAR qualified air cleaners: “This product earned the ENERGY STAR by meeting strict energy efficiency guidelines set by the US EPA. US EPA does not endorse any manufacturer claims of healthier indoor air from the use of this product.”
Manufacturer Name
Brand/Model Name
Model Number
Dust CADR
Tobacco Smoke CADR
Pollen CADR
Dust CADR/Watt
Date Available on the Market
Blueair Inc.
Aerus
402
250
240
255
3.57
Currently
Blueair Inc.
Blueair
501
377
388
378
3.968
Currently
Blueair Inc.
Blueair
402
250
240
255
4.545
Currently
Blueair Inc.
Blueair
601
≥400
438
≥450
≥3.33
Currently
Friedrich A/C Co.
Friedrich A/C Co.
C90A
320
300
370
3.55
21-Jun-04
Sharp Corporation
Sharp
FP-280WM
93
86
97
3.1
Currently
Sharp Corporation
Sharp
FP-N40CX
157
163
156
6.3
Currently
Sharp Corporation
Sharp
FP-N60X
209
213
205
3.9
Currently
Whirlpool Corporation
Whirlpool
AP51030R
332
341
291
3.22
1-Aug-04
Whirlpool Corporation
Whirlpool
AP45030R
334
343
307
3.21
1-Aug-04
Whirlpool Corporation
Whirlpool
AP25030R
166
161
174
3.46
1-Aug-04
The Holmes Group
Holmes
HAP725-U
174
160.4
152.3
2.15
Currently
The Holmes Group
Holmes
HAP1625-U
174
160.4
152.3
2.16
Currently
The Holmes Group
Holmes
HAP750-U
275.6
270.7
244.3
2.37
Currently
The Holmes Group
Holmes
HAP1650-U
275.6
270.7
244.3
2.37
Currently
The Holmes Group
Bionaire
BAP1225-U
174
160.4
152.3
2.16
1-Aug-04
The Holmes Group
Bionaire
BAP1250-U
275.6
270.7
244.3
2.37
1-Aug-04
* Disclaimer: Clean Air Delivery Rate (CADR) is a measure of the amount of contaminant-free air delivered by the room air cleaner. The ENERGY STAR specification requires that manufacturers measure CADR according to AHAM/ANSI AC-1-2002, a test procedure developed by the Association of Home Appliance Manufacturers (AHAM), and recognized by the American National Standards Institute (ANSI). For more information about CADR please visit : www.cadr.org
When considering the purchase of an ENERGY STAR qualified room air cleaner, the comparison should not solely be based on CADR. The CADR of a specific air cleaner model is affected by a number of factors included the size of the model; larger units often have higher CADRs. For more information on the appropriate sized room air cleaner for your application please refer to individual manufacturer web sites or ask your retailer.
Replacing a 10-year-old room air conditioner with a new ENERGY STAR qualified model saves an average of $14 a year on your electric bill.
Earning the ENERGY STAR means a product meets strict energy efficiency guidelines set by the US Environmental Protection Agency and the US Department of Energy.
ENERGY STAR qualified room air conditioners use at least 10% less energy than conventional models.
Remember, saving energy prevents pollution. By choosing ENERGY STAR, you are helping prevent global warming and promoting cleaner air without sacrificing the product quality and performance you expect.
You may also be interested to know that many people buy an air conditioner that is too large. ENERGY STAR suggests making sure your unit is properly sized.
Properly Sized Room Air Conditioners
Many people buy an air conditioner that is too large, thinking it will provider better cooling. However, an oversized air conditioner is actually less effective – and wastes energy at the same time. Air conditioners remove both heat and humidity from the air. If the unit is too large, it will cool the room quickly, but only remove some of the humidity. This leaves the room with a damp, clammy feeling. A properly sized unit will remove humidity effectively as it cools.
Finding which size unit is best for your cooling needs…
1. Determine the square footage of the area to be cooled using the following formulas:
For square and rectangular rooms, multiply the length of the area by its width
For a triangular area, multiply the length of the area by the width and divide by 2
Most rooms can be further divided into these basic shapes to determine the square footage.
If the shape of your room is other than square or rectangular, ask your sales associate to help you determine the square footage.
2. Using the square footage and the chart below, determine the correct cooling capacity. Cooling capacity is measured in British thermal units (BTUs) per hour.
Area To Be Cooled (square feet)
Capacity Needed (BTUs per hour)
100 to 150
5,000
150 to 250
6,000
250 to 300
7,000
300 to 350
8,000
350 to 400
9,000
400 to 450
10,000
450 to 550
12,000
550 to 700
14,000
700 to 1,000
18,000
1,000 to 1,200
21,000
1,200 to 1,400
23,000
1,400 to 1,500
24,000
1,500 to 2,000
30,000
2,000 to 2,500
34,000
3. Make any adjustments for the following circumstances:
If the room is heavily shaded, reduce capacity by 10 percent.
If the room is very sunny, increase capacity by 10 percent.
If more than two people regularly occupy the room, add 600 BTUs for each additional person.
If the unit is used in a kitchen, increase capacity by 4,000 BTUs.
Consider where you install the unit. If you are mounting an air conditioner near the corner of a room, look for a unit that can send the airflow in the right direction.
Room Air Conditioners Information Resources
Information Source: List of ENERGY STAR labeled room air conditioners.
Printed information is also available from the toll-free ENERGY STAR Hotline: 1-888-STAR-YES (1-888-782-7937).
Scope: Database includes qualified models from most appliance manufacturers.
Search criteria include:
Brand
Model Number
Cooling Capacity (BTU/hour)
Louvered Sides (i.e., Does the product have louvered sides?)
Casement (i.e., Is the product a casement model?)
Resulting list provides the following information that can be sorted:
Brand
Model Number
Cooling Capacity (BTU/hour)
Louvered Sides (i.e., Does the product have louvered sides?)
Casement (i.e., Is the product a casement model?)
Energy Efficiency Ratio (EER)
Applicable federal standard (EER)
Percent more efficient than the federal standard
Cooling capacities from 5,000 — 28,000 BTU/hour.
Original Data Source: The U.S. Department of Energy (DOE) obtains data from the Federal Trade Commission or from manufacturers.
Update Frequency: Updated as manufacturers report new information.
Information Source: California Energy Commission database
How to Access: Downloadable via an on-line bulletin board service by dialing (916) 654-4069.
A “Read Me” file describes all of the information available and gives instructions for downloading and use of the database files, including file decompression procedures. The fields in each database are described in a separate text file. Three-letter codes for Manufacturer names and Brand names, for all product types together, are listed in alphabetical order in two separate text files containing approximately 1,500 names and codes.
To make a special request for a printed list, contact: Appliance Certification Program California Energy Commission (916) 654-5106 (916) 654-4304 (fax) Email: [email protected]
Scope: On-line listing shows over 300 models that have an Energy Efficiency Rating (EER) of 9.2 or better (approximately 40 percent models of this type in the database).
115 and 230 volt models
Cooling capacities from 5,000 – 27,600 Btuh
Includes some models with heat pump and electric resistance heating capability
230 and 208 volt, single-phase systems
Downloadable file contains over 800 models that meet minimum federal and California standards (available in DBF, comma-delimited, or ASCII format).
Includes room air conditioners, packaged terminal air conditioners, and packaged terminal heat pumps in one file
115 and 230 volt models
Cooling capacities from 4,400 – 34,000 Btuh
Includes some models with heat pump and electric resistance heating capability
230 and 208 volt, single-phase systems
Scope: List includes 81 models from among 18 brands that have Energy Efficiency Ratios (EER) ranging from 10.0 to 11.8 (5 models w/cooling capacities > 18,000 Btuh have EERs = 9.5).
Cooling capacities from 5,000 — 28,000 BTU/hour.
Models are grouped by size (cooling capacity), and listed in order of descending EER.
Original Data Source: Derived from Directory of Certified Room Air Conditioners, Association of Home Appliance Manufacturers, Chicago, IL, October 1997
Programmable thermostats that have earned the ENERGY STAR help you save money and keep your home comfortable by automatically adjusting your temperature settings while you are asleep or away, saving you about $100 per year.
Earning the ENERGY STAR means products meet strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy.
Store four or more temperature settings a day
Adjust heating or air conditioning turn-on times as the outside temperature changes
Save and repeat multiple daily settings
Remember, saving energy prevents pollution. By choosing ENERGY STAR and taking steps to optimize the performance of your heating and cooling equipment, you are helping to prevent global warming and promoting cleaner air while enhancing the comfort of your home.
You may also be interested to know:
To maximize energy savings, install your thermostat away from natural cool and hot spots. In hot summer months, set your thermostat several degrees higher when you’re away.
Earning the ENERGY STAR means products meet strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy.
ENERGY STAR qualified ventilation fans use 65% less energy, on average, than standard models.
These fans move more air per unit energy used through better blade design.
They provide better efficiency and comfort with less noise.
They use high performance motors that perform better and last longer.
Remember, saving energy prevents pollution. Choosing ENERGY STAR qualified products helps prevent global warming and promotes cleaner air. When you combine efficient products with other ENERGY STAR recommended home improvements such as air sealing and proper insulation, you can save even more while enhancing the comfort of your home.
Want to improve your heating and cooling performance at home? ENERGY STAR can help you improve your home.
ENERGY STAR qualified water coolers can lower annual energy bills by as much as $30 per unit. Water coolers for residential and office use now qualify for the ENERGY STAR label. Both cold only and hot/cold units can earn the ENERGY STAR.
Earning the ENERGY STAR
ENERGY STAR water coolers feature:
Improved chilling mechanisms.
More insulation to keep heated water hot and chilled water cold.
Remember, saving energy prevents pollution. In 2003, through its education and outreach efforts, ENERGY STAR has saved businesses and consumers an estimated $8 billion in energy costs and has prevented greenhouse gas emissions equivalent to taking 18 million cars off the road.
Residential Refrigerators Commercial Solid Door Refrigerators & Freezers
ENERGY STAR qualified refrigerators require about half as much energy as models manufactured before 1993. ENERGY STAR qualified refrigerators provide energy savings without sacrificing the features you want.
Earning the ENERGY STAR
ENERGY STAR qualified refrigerator models use high efficiency compressors, improved insulation, and more precise temperature and defrost mechanisms to improve energy efficiency.
ENERGY STAR qualified refrigerator models use at least 15% less energy than required by current federal standards and 40% less energy than the conventional models sold in 2001.
Many ENERGY STAR qualified refrigerator models include automatic ice-maker and through-the-door ice dispensers. Qualified models are also available with top, bottom, and side-by-side freezers.
ENERGY STAR qualified freezer models use at least 10% less energy than required by current federal standards. Qualified freezer models are available in three configurations:
upright freezers with automatic defrost
upright freezers with manual defrost
chest freezers
Chest freezers are only available with manual defrost.
ENERGY STAR compact refrigerators and freezers use at least 20% less energy than required by current federal standards. Compacts are models with volumes less than 7.75 cubic feet.
Remember, saving energy prevents pollution. Refrigerators are the single biggest energy consumer in most households. Replacing a refrigerator bought in 1990 with a new ENERGY STAR qualified model would save enough energy to light the average household for more than four and a half months.
Commercial Solid Door Refrigerators and Freezers Product List
Whether gas or oil, ENERGY STAR qualified boilers use about 10% less energy than a standard boil
Earning the ENERGY STAR means products meet strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy.
ENERGY STAR qualified boilers have an annual fuel utilization efficiency (AFUE) rating of 85% or greater.
They achieve greater efficiency with improved features, including:
electric ignition, which eliminates the need to have the pilot light burning all the time
new combustion technologies that extract more heat from the same amount of fuel
sealed combustion that uses outside air to fuel the burner, reducing draft and improving safety
Remember, saving energy prevents pollution. By choosing ENERGY STAR and taking steps to optimize the performance of your heating equipment, you are helping to prevent global warming and promoting cleaner air while enhancing the comfort of your home.
You may also be interested to know:
Though these products can be more expensive to purchase up front, the cost difference will be paid back over time through lower energy bills.
When buying new equipment, sizing and installation are as important as product quality. See our recommendations for finding a good contractor.
You can get better heating and cooling performance at home with ENERGY STAR home sealing (insulation and air sealing) and duct sealing.
Consider regular maintenance to maintain your heating and cooling system performance.
Boilers Information Resources
Residential vs. Non-Residential Boilers
Residential: models with energy input less than 300,000 Btuh, and that use a single-phase electric supply. Minimum efficiency levels for this equipment are established by the National Appliance Energy Conservation Act (NAECA). The energy-efficiency metric for residential models is: Annual Fuel Utilization Efficiency (AFUE).
Non-residential: models with energy input equal to or greater than 300,000 Btuh that use a single-phase electric supply, and all models that require a three-phase electric supply. Minimum efficiency levels for this equipment are established by the Energy Policy Act of 1992 (EPAct). The energy-efficiency metric for non-residential models is: Thermal Efficiency (TE).
Information Source: List of ENERGY STAR qualified boilers.
Information Source: California Energy Commission database file
How to Access: Downloadable via an on-line bulletin board service by dialing (916) 654-4069.
A “Read Me” file describes all of the information available and gives instructions for downloading and use of the database files, including file decompression procedures. The fields in each database are described in a separate text file. Three-letter codes for Manufacturer names and Brand names, for all product types together, are listed in alphabetical order in two separate text files containing approximately 1,500 names and codes.
To make a special request for a printed list, contact: Appliance Certification Program California Energy Commission (916) 654-5106 (916) 654-4304 (fax) Email: [email protected]
Scope: File includes both residential and non-residential-type models, and contains data on over 2,000 residential-type models from more than 25 manufacturers (available in DBF, comma-delimited, or ASCII format).
Includes steam and hot water boilers for space heating, and boilers that can be used for either space heating or to heat domestic hot water.
Includes boilers ranging in input from 30,000 85,000,000 Btuh.
Includes natural gas, liquefied petroleum gas, electric, and combination-fired boilers. (Oil-fired boilers are not required to be certified to the Commission but data may be submitted voluntarily by manufacturers.)
Scope:
Two lists cover both types of gas boilers:
88 hot water models from 10 manufacturers with Annual Fuel Utilization Efficiencies (AFUE) > 83.0 %; Capacities from 43,000 139,000 Btuh.
41 steam models from among 10 brands with Thermal Efficiencies >= 81.0 %; Capacities from 81,000 173,000 Btuh.
Two lists cover both types of oil boilers:
94 hot water models from among 20 brands with AFUEs >= 86.0 %; Capacities from 62,000 147,000 Btuh.
31 steam models from among 11 manufacturers with AFUEs >= 86.0 %; Capacities from 78,000 151,000 Btuh.
Models are grouped by size (capacity), and listed in order of descending AFUE.
Original Data Source: Derived from Consumer’s Directory of Certified Efficiency Ratings for Residential Heating and Water Heating Equipment, Gas Appliance Manufacturer’s Association, Arlington, VA, October 1997 April 1998 edition.
Ceiling fans that have earned the ENERGY STAR move air up to 20% more efficiently than standard ceiling fans. This can save you from $15-25 per year on utility bills, plus any additional air conditioning or heating savings you may gain when your fan is operated properly.
Earning the ENERGY STAR
While ENERGY STAR qualified ceiling fans use improved motors and blade designs, you can dramatically increase your savings with ENERGY STAR qualified lighting. If your fan doesn’t include lighting, be sure to purchase an ENERGY STAR qualified light kit. This lighting is efficient and long lasting, so you won’t have to make frequent bulb changes.
Remember, saving energy prevents pollution. To save energy while using a ceiling fan, whether with a standard or an ENERGY STAR model, (use the following tips):
Ceiling Fan Installation and Usage Tips
Want to improve your heating and cooling performance at home? ENERGY STAR can help you improve your home.
What Else Should I Look for When Shopping for Ceiling Fans?
In addition to the ENERGY STAR label there are a number of other items to consider when purchasing and installing a new ceiling fan.
Ceiling Fan Basics
Choosing the Right Size
Choosing the Appropriate Mounting System
Ceiling Fans Rated for Wet/Damp Locations
Ceiling Fan Performance: Components that Count
Ceiling Fan Accessories and Purchasing Choices
Other Helpful Links
Ceiling Fan Basics
Choosing the Right Size Ceiling fan blade spans range from 29 to 54 inches – the most popular being the 52-inch model. To determine which size you need, measure the room where the ceiling fan will be installed and follow these guidelines:
Room Dimensions
Suggested Fan Size
Up to 75 ft2
29 – 36″
76 – 144 ft2
36 – 42″
144 – 225 ft2
44″
225 – 400 ft2
50 – 54″
* Reference: American Lighting Association, 2003
Choosing the Appropriate Mounting System Ceiling fans should be installed, or mounted, in the middle of the room and at least 7 feet above the floor and 18 inches from the walls. If ceiling height allows, install the fan 8 – 9 feet above the floor for optimal airflow.
Standard mounts come with a 3 – 5 inch downrod, which is the metal pipe that extends from the ceiling bracket to the top of the fan. Downrods are usually either 1/2 or 3/4-inch in diameter.
Extended mounts can be used to hang the ceiling fan at the desired 8- 9-feet from the floor for tall ceiling heights. Downrods can be purchased from 6 inches (9 ft ceiling) to 120 inches (20 ft ceiling). Check with the manufacturer or sales associate to determine the right downrod length for you.
Flush mounts anchor the fan directly against the ceiling. Most standard fans can be installed as a flush mount however, many manufacturers sell “hugger” or “low profile” ceiling fans that are specifically designed for this purpose. Hugger fans are ideal for rooms that have ceilings under 8 feet in height or in situations where a fan with optional light would hang down too low. Hugger fans will not move as much air as a regular fan because the blades are closer to the ceiling.
Sloped mounts are used for angled or vaulted ceilings.
See Ceiling Fan Installation and Usage Tips for more information about mounting the ceiling fan.
Wet/Damp Rating. Placing a ceiling fan in a bathroom or other humid locations? Purchase a fan that has been UL listed with a “damp” rating. For fans that may come in direct contact with water, like on a patio or front porch, look for a UL “wet” rating. These fans include features such as sealed/moisture resistant motors, rust resistant housing, stainless steel hardware, and all weather blades.
Performance: Components that Count
No one component defines the performance of the fan; rather it is the combination of all of these components that affects how well a fan works. Motor: Basically, there are two types of ceiling fan motors: those with sealed and lubricated ball bearings and those with bearings that rotate in an oil bath. Lubrication provides smooth operation and contributes to the longevity of the motor. Motors with sealed bearings require little or no maintenance whereas motors with oil baths need occasional service, such as adding oil.
Motor Grade:Performance Grade fans – Use larger and more powerful motors that are designed for continuous use and quiet operation. These are usually the most expensive models Medium Grade fans are suitable for operating 12 hours or less per day. Moderate or Economy Grade fans work best in a room with 8-foot ceilings, running no more than 8 hours a day. Least are the most inexpensive ceiling fans
Motor Housing: The housing is the decorative body of the fan that encloses the fan motor. Fans that use heavier materials, such as die cast metals, for housing tend to vibrate less, provide more stability for longer downrods, and provide a good surface for high quality finishes.
Other features that ensure longevity and quiet operation include heavy-duty windings, precision engineering bearings, and shock-absorbent internal components. These features are commonly found in more expensive ceiling fan models.
Blade Pitch is the angle of the fan’s blades, and it’s measured in degrees. Higher blade pitches usually move more air, which is given in cubic feet per minute, or CFM. However, blade pitch alone does not determine air movement. Other factors such as the motor design and speed, as well as blade design, material, number, and length can contribute to the amount of air movement. Higher pitch is NOT always better – some models offer a higher blade pitch to compensate for a smaller, less efficient motor.
Blades should be sealed from moisture to prevent warping, bubbling, or peeling. Some manufacturers offer special coatings on metal finishes to prevent scratches or tarnishing.
High quality blades are weighed and balanced prior to shipment and come in factory-matched sets. For this reason, they cannot be switched out with other fans. For flexibility in design, a number of manufacturers offer a variety of blade styles and finishes for a particular fan. However, changing the blade style could affect the performance of the fan.
Controls: Most residential ceiling fans (and all ENERGY STAR qualified fans) feature the ability to reverse the motor and airflow direction, allowing you to operate the fan year-round. This control is usually found on the fan’s switch housing.
Ceiling Fan Installation and Usage Tips
Ceiling fan performance and energy savings rely heavily on the proper installation and use of the ceiling fan. Here are a few tips to ensure quality and product performance. Note: consumers should read and understand manufacturer instructions before attempting to install a ceiling fan. Choosing the Appropriate UL-Rated Electrical Box. Make sure that you use the appropriate UL-listed metal box, marked “For Use With Ceiling Fans.” This outlet box is mounted above the ceiling and also is the point where the fan is attached. This box houses all wiring needed to operate and connect the ceiling fan. If you are replacing a ceiling fixture, most likely you will need to replace the electrical box.
Mounting the Ceiling Fan. If possible, the ceiling fan should be anchored to a ceiling joist. In the case that the joist is not located in the center of the room, a special ceiling fan mounting bracket with spiked ends should be installed between joists. Keep in mind that ceiling fans can weigh as much as 50 pounds! For tips on installing a ceiling fan, click on the file below.
Balancing a Wobbly Fan. All fan blades should be balanced prior to shipment; however, if the fan is wobbly after installation, there are ways to fix it. First, make sure that all connections are properly aligned and tightly fastened. Check the alignment of the blades by holding a yardstick vertically along the edges; you may be able to gently bend a misaligned blade holder back into proper place. If all blades are aligned, a balancing kit can then be used to pinpoint the culprit. These kits are either provided within product packaging (e.g., balancing clips and blade weights) or can be sent by the manufacturer free of charge.
Turn Off When not in the Room. Ceiling fans cool people, not rooms. If the room is unoccupied, turn off the ceiling fan to save energy.
Using the Ceiling Fan Year Round. In the summer, use the ceiling fan in the counter-clockwise direction. The airflow produced by the ceiling fan creates a wind-chill effect, making you “feel” cooler. In the winter, reverse the motor and operate the ceiling fan at low speed in the clockwise direction. This produces a gentle updraft, which forces warm air near the ceiling down into the occupied space. Remember to adjust your thermostat when using your ceiling fan – additional energy and dollar savings could be realized with this simple step!
Ceiling Fan Accessories and Purchasing Choices
Light Kits: There are many choices of ceiling fan light kits.
Branched, or stemmed, light kits usually come with 3 or 4 “arms” and can either point up toward the ceiling fan or down toward the floor.
Bowl light kits can either be directly attached to the ceiling fan housing (i.e., integral), or attached below the fan. Bowl and shade designs range from clear to alabaster, crystal, or tiffany – the fancier the glass design, the more expensive. Nearly all ENERGY STAR qualified ceiling fan light fixtures use bowl lighting.
Uplight designs are also becoming more popular. where the light kit sits on top of the housing and point up toward the ceiling, casting a softer light throughout the room
Ceiling fan light kits can be purchased three different ways: (1) integrated into the fan, (2) included with the fan at the time of purchase, or (3) sold separately. Many of the light kits that are sold separately are “universal,” meaning that they can be used on a number of different fan models. Similarly, most ceiling fans are light kit adaptable. However, there are many cases where compatibility is only between light kits and ceiling fans under the same brand. Information regarding light kit/ceiling fan compatibility should be found on the product packaging.
Remote and Wall Controls: Standard controls for the ceiling fan motor include a pull chain attached to the housing (two if lighting is included), and a motor reversing switch on the lower, or switch, housing. However, many manufacturers offer remote or wall controls either sold with the model or as an accessory. Most ceiling fans have a 3-speed switch in the housing and as such, most ceiling fan wall controls complement this set-up. When choosing a wall control for a fan/light combination, make sure to choose one that operates each function separately and can operate the fan at 3 or 4 distinct speeds. Using a conventional dimmer switch to run the fan could cause the ceiling fan motor to hum. When you choose an ENERGY STAR qualified fan with lighting or an ENERGY STAR qualified light kit, and you wish to use it with a dimmer, make sure the packaging indicates that the lighting is dimmable.
Be sure to look for controls that match up with your ceiling fan: maximum amps, number of speeds, total lamp wattage, and brand. Some of the remote and wall controls work with a number of different ceiling fan brands; however, there are some remotes that should only be used with specific brands. Check with the sales associate and/or the product packaging if purchasing the controls separately.
Purchasing Choices Ceiling fans are sold in many different distribution channels: lighting and builder showrooms, national retail chains, hardware stores, and electrical distributors. Showrooms offer consumers many different brands, finishes, blade types, and light kit options. Here, each consumer may essentially design his or her own fan. Retail chains and hardware stores usually offer a number of different choices in completed fans, with or without lighting, and light kits.
Fans With Lights
Efficiency (CFM/Watt)
Product Type
Manufacturer Name
Brand Name
Model Name
Model Number
Retailer/SKU Number
Low
Medium
High
Type of Lighting
Total Input (Watts)
Motor Warranty (years)
Components Warranty (years)
Date Available on Market
Ceiling Fan with Light Kit – Pin Based CFLs
Hunter Fan Company
Hunter Fan Company
52″ Clarrilon
21241
163
113
75
Circline
22
Lifetime
All components except glass – 1
15-Aug-02
Ceiling Fan with Light Kit – Pin Based CFLs
Hunter Fan Company
Hunter Fan Company
52″ Sonora – Brushed Nickel
21431
155
108
75
Circline
22
Lifetime
All components except glass – 1
1-Oct-03
Ceiling Fan with Light Kit – Pin Based CFLs
Hunter Fan Company
Hunter Fan Company
52″ Sonora – French Vanilla
21432
155
108
75
Circline
22
Lifetime
All components except glass – 1
1-Oct-03
Ceiling Fan with Light Kit – Pin Based CFLs
Hunter Fan Company
Hunter Fan Company
Chantilly
23547
157
108
76
CR
29.5
Lifetime
1 year – glass, blade switch (other parts included in general fan warranty)
Replacing a dishwasher manufactured before 1994 with an ENERGY STAR qualified dishwasher can save you more than $25 a year in energy costs.
Earning the ENERGY STAR means a product meets strict energy efficiency guidelines set by the US Environmental Protection Agency and the US Department of Energy.
ENERGY STAR qualified dishwashers use 25% less energy than the federal minimum standard for energy consumption.
Because they use less hot water compared to conventional models, an ENERGY STAR qualified dishwasher saves about $100 over its lifetime.
Remember, saving energy prevents pollution. By choosing ENERGY STAR, you are helping prevent global warming and promote cleaner air without sacrificing the product quality and performance you expect.
You may also be interested to know that you can save extra energy while washing dishes, whether with a standard or an ENERGY STAR model:
Run your dishwasher with a full load. Most of the energy used by a dishwasher goes to heat water. Since you can’t decrease the amount of water used per cycle, fill your dishwasher to get the most from the energy used to run it.
Avoid using the heat-dry, rinse-hold and pre-rinse features. Instead use your dishwasher’s air-dry option. If your dishwasher does not have an air-dry option, prop the door open after the final rinse to dry the dishes.
Purchasing Tips
Choose the right size for your home. Standard capacity models hold more than 8 places settings and 6 serving pieces. Compact capacity models hold 8 place settings and six serving pieces or less. If you have to operate a compact model more frequently, you may actually use more energy than you would with a standard model over time.
Choose a dishwasher with several wash cycle selections. If your dishes are only slightly soiled, you can use a light or energy-saving wash cycle, which uses less water and operates for a shorter period of time.
Check the yellow EnergyGuide label. The EnergyGuide label indicates how much energy the model uses, compares the energy use of similar models, and approximates annual operating costs.
Dishwashers Information Resources
Scope: Database includes qualified models from most appliance manufacturers.
Search criteria include:
Brand
Model number
Resulting list provides the following information that can be sorted:
Brand
Model Number
Annual Energy Consumption (kWh/year)
Applicable federal standard
Energy Factor
Percent more efficient than federal standard
Original Data Source: The U.S. Department of Energy (DOE) obtains data from the Federal Trade Commission or from manufacturers.
Update Frequency: Updated as manufacturers report new information.
Information Source: California Energy Commission database file
How to Access: Downloadable via an on-line bulletin board service by dialing 916 654-4069.
A “Read Me” file describes all of the information available and gives instructions for downloading and use of the database files, including file decompression procedures. The fields in each database are described in a separate text file. Three-letter codes for Manufacturer names and Brand names, for all product types together, are listed in alphabetical order in two separate text files containing approximately 1,500 names and codes.
To make a special request for a printed list, contact: Appliance Certification Program California Energy Commission 916 654-5106 916 654-4304 (fax) Email: [email protected]
Scope: File contains washing and cooking appliances in a single file (available in DBF, comma-delimited, or ASCII format).
Contains over 400 models from among more than 25 brands that meet minimum federal and California standards. Includes compact and standard sizes.
Information fields include:
Manufacturer code
Brand code
Type code
Energy Factor
Original Data Source: Data obtained by the Commission from the Federal Trade Commission or provided directly to the Commission by manufacturers.
Update Frequency: Monthly
Information Souce: American Council for an Energy Efficient Economy’s (ACEEE) Listings of the Most Efficient Appliances
How to Access: Listings are also printed in ACEEE’s Consumer Guide to Home Energy Savings, 6th ed. 1998, available in bookstores or directly from ACEEE. Orders may be placed by phone, fax, or email.
Contact: Publications Manager American Council for an Energy-Efficient Economy 202 429-0063 202 429-0193 (fax) Email: [email protected]
Cost: 1-25 copies: $8.95 each 26-99 copies: $6.36 each 100-499 copies: $4.77 each 500-999 copies: $3.98 each
Scope:
Listing includes 36 models from among 13 brands that have efficiencies at least 20 percent better than federal standards.
Information fields include:
Brand
Model number
Energy use (kWh/yr)
Annual energy cost
Models are listed in order of ascending estimated annual energy use.
Original Data Source: Obtained by ACEEE from the Federal Trade Commission, from individual manufacturers, and from other public sources.
Copiers are the most energy-intensive type of office equipment because they sit idle for long periods of time.
Earning the ENERGY STAR
Copiers that have earned the ENERGY STAR “sleep” or power down when not in use, and use 40% less electricity compared to standard models.
ENERGY STAR qualified high-speed copiers feature duplexing units that automatically make double-sided copies, reduces paper costs by about $60 a month. Using less paper also saves energy because it takes 10 times more energy to manufacture a piece of paper than it does to copy an image onto it.
Businesses that use ENERGY STAR enabled office equipment may realize additional savings on air conditioning and maintenance.
Remember, saving energy prevents pollution. Because most copiers are left on 10 hours a day, power management features are important for saving energy and an easy way to reduce air pollution. Learn about the copier of the future.
List Current as of April 27, 2004
Company Brand Model Size Format Mono/Color Copy Speed (ppm)
Aurora Office Automation Sales Co., Ltd.
Aurora
AD-158
Standard-Sized
Monochrome
15
Aurora Office Automation Sales Co., Ltd.
Aurora
AD-159
Standard-Sized
Monochrome
15
Aurora Office Automation Sales Co., Ltd.
Aurora
AD-159P
Standard-Sized
Monochrome
15
Aurora Office Automation Sales Co., Ltd.
Aurora
AD-165
Standard-Sized
Monochrome
16
Aurora Office Automation Sales Co., Ltd.
Aurora
AD-209
Standard-Sized
Monochrome
20
Aurora Office Automation Sales Co., Ltd.
Aurora
AD-259
Standard-Sized
Monochrome
25
Aurora Office Automation Sales Co., Ltd.
Aurora
AD-359
Standard-Sized
Monochrome
35
Aurora Office Automation Sales Co., Ltd.
Aurora
AD-409
Standard-Sized
Monochrome
40
Aurora Office Automation Sales Co., Ltd.
Aurora
AD-459
Standard-Sized
Monochrome
45
Aurora Office Automation Sales Co., Ltd.
Aurora
AD-559
Standard-Sized
Monochrome
55
Canon U.S.A., Inc.
Canon
C130
Standard-Sized
Monochrome
13
Canon U.S.A., Inc.
Canon
C130F
Standard-Sized
Monochrome
13
Canon U.S.A., Inc.
Canon
C210
Standard-Sized
Monochrome
21
Canon U.S.A., Inc.
Canon
imageRUNNER 600V
Standard-Sized
Monochrome
60
Canon U.S.A., Inc.
Canon
NP6035F
Standard-Sized
Monochrome
35
Canon U.S.A., Inc.
Canon
NP7130
Standard-Sized
Monochrome
13
Canon U.S.A., Inc.
Canon
NP7130F
Standard-Sized
Monochrome
13
Canon U.S.A., Inc.
Canon
NP7500
Standard-Sized
Monochrome
50
Canon U.S.A., Inc.
Canon
NP7850
Standard-Sized
Monochrome
85
Canon U.S.A., Inc.
Canon
PC1060
Standard-Sized
Monochrome
13
Canon U.S.A., Inc.
Canon
PC1061
Standard-Sized
Monochrome
13
Canon U.S.A., Inc.
Canon
PC425
Standard-Sized
Monochrome
4
Canon U.S.A., Inc.
Canon
PC428
Standard-Sized
Monochrome
4
Canon U.S.A., Inc.
Canon
PC920
Standard-Sized
Monochrome
10
Canon U.S.A., Inc.
Canon
PC921
Standard-Sized
Monochrome
10
Canon U.S.A., Inc.
Canon
PC940
Standard-Sized
Monochrome
13
Canon U.S.A., Inc.
Canon
PC941
Standard-Sized
Monochrome
13
Canon U.S.A., Inc.
Canon
PC950
Standard-Sized
Monochrome
13
Canon U.S.A., Inc.
Canon
PC980
Standard-Sized
Monochrome
13
Canon U.S.A., Inc.
Canon
PC981
Standard-Sized
Monochrome
13
Konica Minolta Business Solutions U.S.A., Inc.
Minolta
Di2010
Standard-Sized
Monochrome
20
Konica Minolta Business Solutions U.S.A., Inc.
Minolta
Di2510
Standard-Sized
Monochrome
20
Company Brand Model Size Format Mono/Color Copy Speed (ppm)
Konica Minolta Business Solutions U.S.A., Inc.
Minolta
Di2510f
Standard-Sized
Monochrome
25
Konica Minolta Business Solutions U.S.A., Inc.
Minolta
Di3010
Standard-Sized
Monochrome
30
Konica Minolta Business Solutions U.S.A., Inc.
Minolta
Di3010f
Standard-Sized
Monochrome
30
Konica Minolta Business Solutions U.S.A., Inc.
Minolta
Di3510
Standard-Sized
Monochrome
35
Konica Minolta Business Solutions U.S.A., Inc.
Minolta
Di3510f
Standard-Sized
Monochrome
35
Kyocera Mita America, Inc.
Copystar
CS-1500
Standard-Sized
Monochrome
15
Kyocera Mita America, Inc.
Copystar
CS-1620
Standard-Sized
Monochrome
16
Kyocera Mita America, Inc.
Copystar
CS-2225
Standard-Sized
Monochrome
25
Kyocera Mita America, Inc.
Kyocera Mita
KM-1500
Standard-Sized
Monochrome
15
Kyocera Mita America, Inc.
Kyocera Mita
KM-1620
Standard-Sized
Monochrome
16
Lanier Worldwide, Inc.
Lanier
5218
Standard-Sized
Monochrome
18
Lanier Worldwide, Inc.
Lanier
5222
Standard-Sized
Monochrome
22
Lanier Worldwide, Inc.
Lanier
5227
Standard-Sized
Monochrome
27
Lanier Worldwide, Inc.
Lanier
5255
Standard-Sized
Monochrome
55
Lanier Worldwide, Inc.
Lanier
5355
Standard-Sized
Monochrome
55
Lanier Worldwide, Inc.
Lanier
5365
Standard-Sized
Monochrome
65
Lanier Worldwide, Inc.
Lanier
5415
Standard-Sized
Monochrome
15
Lanier Worldwide, Inc.
Lanier
5435
Standard-Sized
Monochrome
35
Lanier Worldwide, Inc.
Lanier
5445
Standard-Sized
Monochrome
45
Lanier Worldwide, Inc.
Lanier
5455
Standard-Sized
Monochrome
55
Lanier Worldwide, Inc.
Lanier
5470
Standard-Sized
Monochrome
70
Lanier Worldwide, Inc.
Lanier
5485
Standard-Sized
Monochrome
85
Lanier Worldwide, Inc.
Lanier
5505
Standard-Sized
Monochrome
105
Lanier Worldwide, Inc.
Lanier
5515
Monochrome
15
Lanier Worldwide, Inc.
Lanier
5518
Monochrome
18
Lanier Worldwide, Inc.
Lanier
5613
Standard-Sized
Monochrome
13
Lanier Worldwide, Inc.
Lanier
5613F
Standard-Sized
Monochrome
13
Lanier Worldwide, Inc.
Lanier
5618
Standard-Sized
Monochrome
18
Lanier Worldwide, Inc.
Lanier
5622
Standard-Sized
Monochrome
22
Lanier Worldwide, Inc.
Lanier
5627
Standard-Sized
Monochrome
27
Lanier Worldwide, Inc.
Lanier
5635
Monochrome
35
Lanier Worldwide, Inc.
Lanier
5645
Monochrome
45
Company Brand Model Size Format Mono/Color Copy Speed (ppm)
Lanier Worldwide, Inc.
Lanier
5685
Monochrome
85
Lanier Worldwide, Inc.
Lanier
5705
Monochrome
105
Lanier Worldwide, Inc.
Lanier
5813
Standard-Sized
Monochrome
51
Lanier Worldwide, Inc.
Lanier
LD0105
Standard-Sized
Monochrome
90
Lanier Worldwide, Inc.
Lanier
LD090
Standard-Sized
Monochrome
90
Lanier Worldwide, Inc.
Lanier
LW 110/LW 111
Large/Wide Format
Monochrome
32
Lanier Worldwide, Inc.
Lanier
LW 210
Large/Wide Format
Monochrome
7.5
Oce-Technologies B.V.
Oce
3023
Standard-Sized
Monochrome
23
Oce-Technologies B.V.
Oce
3055
Standard-Sized
Monochrome
55
Oce-Technologies B.V.
Oce
3100
Standard-Sized
Monochrome
100
Oce-Technologies B.V.
Oce
3165E
Standard-Sized
62
Olivetti Tecnost
Olivetti
d-Copia 16
Standard-Sized
Monochrome
16
Olivetti Tecnost
Olivetti
d-Copia 200
Standard-Sized
Monochrome
20
Panasonic
Panasonic
FP-D355
Monochrome
35
Panasonic
Panasonic
FP-D455
Monochrome
45
Panasonic
Panasonic
FP-D605
Monochrome
60
Ricoh Corporation
Ricoh
Afcio 1113
Standard-Sized
Monochrome
13
Ricoh Corporation
Ricoh
Aficio
Standard-Sized
Monochrome
27
Ricoh Corporation
Ricoh
Aficio 1013
Standard-Sized
Monochrome
13
Ricoh Corporation
Ricoh
Aficio 1013F
Standard-Sized
Monochrome
13
Ricoh Corporation
Ricoh
Aficio 1015
Standard-Sized
Monochrome
15
Ricoh Corporation
Ricoh
Aficio 1018
Standard-Sized
Monochrome
18
Ricoh Corporation
Ricoh
Aficio 1022
Standard-Sized
Monochrome
22
Ricoh Corporation
Ricoh
Aficio 1035
Standard-Sized
Monochrome
35
Ricoh Corporation
Ricoh
Aficio 1045
Standard-Sized
Monochrome
45
Ricoh Corporation
Ricoh
Aficio 1050
Standard-Sized
Monochrome
105
Ricoh Corporation
Ricoh
Aficio 150
Standard-Sized
Monochrome
15
Ricoh Corporation
Ricoh
Aficio 180
Standard-Sized
Monochrome
18
Ricoh Corporation
Ricoh
Aficio 2090
Standard-Sized
Monochrome
90
Ricoh Corporation
Ricoh
Aficio 2105
Standard-Sized
Monochrome
105
Ricoh Corporation
Ricoh
Aficio 220
Standard-Sized
Monochrome
22
Ricoh Corporation
Ricoh
Aficio 270
Standard-Sized
Monochrome
27
Ricoh Corporation
Ricoh
Aficio 350e
Standard-Sized
Monochrome
35
Ricoh Corporation
Ricoh
Aficio 450e
Standard-Sized
Monochrome
45
Ricoh Corporation
Ricoh
Aficio 550
Standard-Sized
Monochrome
55
Ricoh Corporation
Ricoh
Aficio 551
Standard-Sized
Monochrome
55
Company Brand Model Size Format Mono/Color Copy Speed (ppm)
Ricoh Corporation
Ricoh
Aficio 700
Standard-Sized
Monochrome
70
Ricoh Corporation
Ricoh
FT3813
Standard-Sized
Monochrome
13
Ricoh Corporation
Ricoh
FT7950
Standard-Sized
Monochrome
50
Ricoh Corporation
Ricoh
FT7960
Standard-Sized
Monochrome
60
Ricoh Corporation
Ricoh
FT7970
Standard-Sized
Monochrome
70
Ricoh Corporation
Ricoh
FW7030D
Large/Wide Format
Monochrome
3.6
Sharp Electronics Corporation
Lanier
5415
Standard-Sized
Monochrome
15
Sharp Electronics Corporation
Sharp
AL-1611
Standard-Sized
Monochrome
16
Sharp Electronics Corporation
Sharp
AL-1622
Standard-Sized
Monochrome
16
Sharp Electronics Corporation
Sharp
AL-1631 (U.S./Canada)
Standard-Sized
Monochrome
16
Sharp Electronics Corporation
Sharp
AR-162S
Standard-Sized
Monochrome
16
Sharp Electronics Corporation
Sharp
SF-2530
Standard-Sized
Monochrome
30
Sharp Electronics Corporation
Sharp
SF-2540
Standard-Sized
Monochrome
40
SINDORICOH Co. Ltd.
SINDORICOH
MyCopy 1000
Standard-Sized
Monochrome
10
SINDORICOH Co. Ltd.
SINDORICOH
MyCopy 1100
Standard-Sized
Monochrome
10
SINDORICOH Co. Ltd.
SINDORICOH
SPIRIO 4230
Standard-Sized
Monochrome
27
SINDORICOH Co. Ltd.
SINDORICOH
SPIRIO 4240
Standard-Sized
Monochrome
27
UTAX GmbH
TA Triumph-Adler
DC 2025
Standard-Sized
Monochrome
25
UTAX GmbH
TA Triumph-Adler
DC 2035
Standard-Sized
Monochrome
35
UTAX GmbH
Utax
C 148
Standard-Sized
Monochrome
14
UTAX GmbH
Utax
C 149
Standard-Sized
Monochrome
14
UTAX GmbH
Utax
C 157
Standard-Sized
Monochrome
15
UTAX GmbH
Utax
C 187
Standard-Sized
Monochrome
18
UTAX GmbH
Utax
C 218
Standard-Sized
Monochrome
20
UTAX GmbH
Utax
C 237
Standard-Sized
Monochrome
23
UTAX GmbH
Utax
C 307
Standard-Sized
Monochrome
30
UTAX GmbH
Utax
C 407
Standard-Sized
Monochrome
40
UTAX GmbH
Utax
C 518
Standard-Sized
Monochrome
51
UTAX GmbH
Utax
C 98
Standard-Sized
Monochrome
12
UTAX GmbH
Utax
CD 1025
Standard-Sized
Monochrome
25
UTAX GmbH
Utax
CD 1035
Standard-Sized
Monochrome
35
UTAX GmbH
Utax
CD 21
Standard-Sized
Monochrome
20
UTAX GmbH
Utax
CD 41
Standard-Sized
Monochrome
40
UTAX GmbH
Utax
CD 51
Standard-Sized
Monochrome
50
Xerox Corporation
Xerox
1010
Standard-Sized
101
Xerox Corporation
Xerox
2101
Standard-Sized
Monochrome
101
Company Brand Model Size Format Mono/Color Copy Speed (ppm)
Commercial Fryers Fryers that have earned the ENERGY STAR are up to 25% more energy-efficient than standard models.
Earning the ENERGY STAR ENERGY STAR qualified fryers include both gas and electric open-deep fat models. Fryers that earn the ENERGY STAR must meet a minimum cooking efficiency* of 50% (gas) and 80% (electric) while also meeting a maximum idle energy rate of 9,000 Btu/hr (gas) and 1,000 watts (electric). Energy-efficient fryers that have earned the ENERGY STAR offer shorter cook times and higher production rates through advanced burner and heat exchanger designs. Frypot insulation reduces standby losses resulting in a lower idle energy rate. Where can I get one? Contact the manufacturers directly or speak with your food equipment supplier. What can ENERGY STAR qualified fryers save me? Each ENERGY STAR qualified gas fryer can save businesses 28 MBtu annually, or average of $185/year on utility bills. Each ENERGY STAR qualified electric fryer can save 879 kWh annually, or an average of $60/year on utility bills. * Under heavy-load conditions
Company Name
Brand Name
Model Name
Model Number
Fryer Size (Inches)
Fuel Type
Cooking Energy Efficiency (%)
Idle Energy Rate
Date Available
Frymaster L.L.C.
Frymaster
MJH50
MJH50
14×15
Gas
50
6400
Currently Available
Frymaster L.L.C.
Frymaster
414
414
14×15.5
Electric
81
967
Currently Available
Frymaster L.L.C.
Frymaster
H17TC
H17TC
14×15.5
Electric
84
740
Currently Available
Keating of Chicago, Inc.
Keating
IFM 14
IFM 14
14×14
Gas
57.4
4700
Currently Available
Pitco Frialator
Pitco
MGII
MGII
14
Gas
54
8510
Apr-02
Pitco Frialator
Pitco
SGH50
SGH50
14
Gas
54
8510
Sep-02
Pitco Frialator
Pitco
SEH50
SEH50
14
Electric
82.1
930
May-03
Pitco Frialator
Pitco
Pitco
MEII
14
Electric
82.1
930
Sep-03
Ultrafryer Systems, Inc.
Ultrafryer Systems
PAR3-14
PAR3-14
14
Gas
64.7
4180
Sep-99
EneryStar.org - No relation with EnergyStar.gov, ENERGY STAR®, the Environmental Protection Agency (US EPA), or the US government. | About